Heavy Duty Series
(external halyard)
- Threaded Type
- Revolving
-
- Single Pulley -
Cast aluminum construction with a 3-7/8” outside diameter aluminum pulley on 1/2” stainless steel axles. This truck is designed to be used on flagpoles that have up to a 5-1/2” outside top diameter with female fitting installed. The bottom of the spindle has a 1-1/4” NPT threading and is screwed into the top of the flagpole while the top spindle is designed to accept an ornament with a spindle threading of 1/2”-13NC as standard but can be supplied with other sizes of threading. The ornament is secured to the truck with a 1/4”- 20NC stainless steel set screw. The truck body rotates on 26 stainless steel ball bearings on cast races. The recommended maximum halyard diameter is 3/8”.
| Model | Item # | Pole Dia. | Color | $US | Add to cart |
|---|---|---|---|---|---|
| HDT-1 | w340335 | 5 1/2" | Silver | 132.00 |  |
| HDT-1 | w340336 | 5 1/2" | Bronze | 143.00 | |
| HDT-1 | w340337 | 5 1/2" | White | 143.00 | |
| HDT-1 | w340338 | 5 1/2" | Black | 143.00 | |