Eder Series One
Molded fiberglass construction with 3/4” outside diameter nylon pulley on 3/16” stainless steel axle. The stem of the truck is designed to slip into a 2” inside diameter pole top and is held in place by drilling through the pole and securing the truck to the pole with an appropriate size bolt or screw. The top of the truck is designed to accept an ornament with a spindle threading of 1/2”-13NC. Maximum halyard size is 1/4”.
| Item # | Description | $US | Add to cart |
|---|---|---|---|
| w340226 | Eder series one: white fiberglass truck | 63.00 |  |
| w340227 | Eder series one: bronze fiberglass truck | 67.00 | |
Eder Series Two
Molded fiberglass construction with 1-1/2” outside diameter cast nylon pulleys on 1/4” stainless steel axles. The top of the truck is designed to accept an ornament with a spindle threading of 1/2”-13NC as standard but can be supplied with other sizes of threading if desired. The aluminum spindle is threaded 1-1/4”NPT. The maximum recommended halyard diameter is 5/16”.
| Item # | Description | $US | Add to cart |
|---|---|---|---|
| w340228 | Eder series two: white fiberglass truck | 63.00 | |
| w340229 | Eder series two: bronze fiberglass truck | 67.00 | |
Eder Internal Halyard Series
Molded fiberglass construction with 1-1/2” outside diameter cast nylon pulley. This stationary truck is designed to be used on flagpoles that have up to 3-1/4” outside top diameter with female fitting installed. The spindle has 1-1/4”NPT threading and is screwed into the top of the flagpole. The spindle is hollow allowing the halyard to feed from inside the flagpole. The top of the truck will accept an ornament with 1/2”-13NC threading as standard but can be supplied with other threading sizes. Maximum halyard diameter is 5/16”.
| Item # | Description | $US | Add to cart |
|---|---|---|---|
| w340232 | Eder IH series: white fiberglass truck | 63.00 | |
| w340233 | Eder IH series: bronze fiberglass truck | 67.00 | |