IH-1 Series
(internal halyard)
- Cap Style
- Stationary
-
- Single Pulley -
Cast aluminum construction for use on rope style internal halyard flagpoles. A small pulley assembly is added to the inside of a standard outrigger style truck to allow the halyard to feed from inside the flagpole. The pulley assembly has a 1 7/16” outside diameter cast nylon pulley on a 1/4” stainless steel axle and is held in place inside the truck by 5/16”-18NC stainless steel set screw. The truck has a 2” outside diameter cast nylon pulley on a 1/4” stainless steel axle and is designed to slip over the top of the flagpole and be secured with three 5/16”-18NC stainless steel set screws. The top of the truck will accept an ornament with 1/2”-13NC threading as standard. Recommended max rope diameter is 5/16”.
| Model | Item # | Pole Dia. | Color | $US | Add to cart |
|---|---|---|---|---|---|
| IH-1-3 | w340178 | 3" | Silver | 48.00 |  |
| IH-1-35 | w340179 | 3 1/2" | Silver | 65.00 | |
| IH-1-3B | w340180 | 3" | Bronze | 55.00 | |
| IH-1-35B | w340181 | 3 1/2" | Bronze | 74.00 | |
| IH-1-3W | w340182 | 3" | White | 55.00 | |
| IH-1-35W | w340183 | 3 1/2" | White | 74.00 | |
| IH-1-3BL | w340184 | 3" | Black | 55.00 | |
| IH-1-35BL | w340185 | 3 1/2" | Black | 74.00 | |