Construction - Poles are fabricated to meet AASHTO 1994 requirements. Welds conform to applicable AWS structural welding code. Pole shaft is one piece, 6063 aluminum alloy, heat treated to a T6 temper. Pole base shall be 365 or A356 aluminum alloy, heat treated to a T6 temper after welding. Hand hole is 2" x 4" minimum. Poles may contain minor defects such as light scratches.
Grounding - Grounding provision shall be immediately accessible through hand hole, 3/8-16 threads.
Recommended Uses
Flagpole, Lamp Post, Do-It-Yourself Projects, Post for Netting (i.e. driving range, golf course, baseball fields)
If using RTA for Flagpole, then use the following to make the conversion:
-
Beacon (optional)
-
3" Truck (if using revolving truck, then adapter is needed)
-
Halyard
-
Cleat
-
3" Adapter (if using revolving truck)
Note: Parts are silver and will need to be painted gray to match pole.
For other flagpole accessories , such as ornaments, balls, snaps, etc, see
hardware.
